SEMESTER II MA1151 MATHEMATICS II SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering)
SEMESTER II MA1151 MATHEMATICS II

UNIT I MULTIPLE INTEGRALS 10+3
Double integration – Cartesian and Polar Co-ordinates – Change of order of integration –
Area as a double integral – Change of variables between Cartesian and Polar Co-
ordinates – Triple integration – Volume as a triple integral.

UNIT II VECTOR CALCULUS 9+2
Gradient, Divergence and Curl – Directional derivative – Irrotational and Solenoidal
vector fields – Vector integration – Problem solving using Green’s theorem, Gauss
divergence theorem and Stoke’s theorem – Simple applications and verifications.

UNIT III ANALYTIC FUNCTIONS 9+2
Necessary and Sufficient conditions (without proof) – Cauchy-Riemann equations –
Properties of analytic functions – Harmonic conjugate – Construction of Analytic
functions – Conformal mapping: w = z+a, az, 1/z, Z2
and bilinear transformation.

UNIT IV COMPLEX INTEGRATION 10+2
Problems solving using Cauchy’s integral theorem and integral formula – Taylor’s and
Laurent’s expansions – Residues – Cauchy’s residue theorem – Contour integration over
unit circle – Semicircular contours with no pole on real axis.

UNIT V LAPLACE TRANSFORMS 10+3
Transforms of elementary functions – Basic properties – Transforms of derivatives and
integrals – Initial and final value theorems – Inverse Laplace transforms – Convolution
theorem – Solution of Ordinary Differential Equations with constant coefficients using
Laplace transforms – Transform of periodic functions – Solution of integral equations.
L: 48 T: 12 Total: 60

TEXT BOOK
1. Grewal, B.S., “Higher Engineering Mathematics”, Thirty eighth Edition, Khanna
Publishers, New Delhi, 2005.

REFERENCES
1. Glyn James., “Advanced Modern Engineering Mathematics”, Third Edition,Pearson Education Ltd, New Delhi, 2004.
2. Venkataraman. M. K., “Engineering Mathematics”, Volume I and II Revised enlarged Fourth Edition, The National Publishing Company, Chennai, 2004.
3. Veerarajan. T., “Engineering Mathematics (for first year)”, Fourth Edition, Tata McGraw – Hill Publishing Company Limited, New Delhi, 2005.
4. V. Sundaram, R. Balasubramanian, K.A. Lakshminarayanan, “Engineering Mathematics”, Fifth Edition, Vikas Publishing house Pvt. Ltd., New Delhi, 2006.

SEMESTER II PHYSICS AND CHEMISTRY LABORATORY II

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007
Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering)
SEMESTER II PHYSICS AND CHEMISTRY LABORATORY II

PHYSICS LABORATORY
L T P
0 0 2

LIST OF EXPERIMENTS (Any 6)
1. Determination of Young’s Modulus of a material of the bar - Uniform Bending
2. Thermal conductivity of a bad conductor - Lee’s Disc Method
3. Spectrometer : i-d curve
4. Determination of radius of curvature of a lens by Newton’s ring method
5. Spectrometer - Determination of wavelength of Hg spectrum using Grating
6. Determination of band gap of a semiconducting material.
7. Potentiometer - Measurement of resistance of the given wire.
8. Potentiometer - Determination of Thermo-emf using Thermo couple.
9. Logic Gates - OR,AND, NOT, NOR & NAND

CHEMISTRY LABORATORY
L T P
0 0 2
LIST OF EXPERIMENTS (Any 6)
1. Determination of chloride content of water sample by argentometric method.
2. Determination of strength of HCl by pH meter.
3. Estimation of copper in brass.
4. Determination of strength of iron by potentiometric method using dichromate.
5. Determination of molecular weight of a polymer by viscometry method.
6. Determination of percentage of calcium in limestone by EDTA method.
7. Determination of corrosion rate of given specimen by weight loss method.
8. Determination of BOD in sewage.
9. Determination of flue gas by Orsat method.
10. Determination of unknown dye concentration by spectrophotometer method.

REFERENCES

1. Textbook of Quantitative Inorganic Analysis, A.I. Vogel, ELBS, London.
2. Experiments in Physical Chemistry, D.P. Shoemaker and G.W. Garland,
McGraw Hill, London.

SEMESTER II MA1151 MATHEMATICS II SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering)
SEMESTER II MA1151 MATHEMATICS II

UNIT I MULTIPLE INTEGRALS 10+3
Double integration – Cartesian and Polar Co-ordinates – Change of order of integration –
Area as a double integral – Change of variables between Cartesian and Polar Co-
ordinates – Triple integration – Volume as a triple integral.

UNIT II VECTOR CALCULUS 9+2
Gradient, Divergence and Curl – Directional derivative – Irrotational and Solenoidal
vector fields – Vector integration – Problem solving using Green’s theorem, Gauss
divergence theorem and Stoke’s theorem – Simple applications and verifications.

UNIT III ANALYTIC FUNCTIONS 9+2
Necessary and Sufficient conditions (without proof) – Cauchy-Riemann equations –
Properties of analytic functions – Harmonic conjugate – Construction of Analytic
functions – Conformal mapping: w = z+a, az, 1/z, Z2
and bilinear transformation.

UNIT IV COMPLEX INTEGRATION 10+2
Problems solving using Cauchy’s integral theorem and integral formula – Taylor’s and
Laurent’s expansions – Residues – Cauchy’s residue theorem – Contour integration over
unit circle – Semicircular contours with no pole on real axis.

UNIT V LAPLACE TRANSFORMS 10+3
Transforms of elementary functions – Basic properties – Transforms of derivatives and
integrals – Initial and final value theorems – Inverse Laplace transforms – Convolution
theorem – Solution of Ordinary Differential Equations with constant coefficients using
Laplace transforms – Transform of periodic functions – Solution of integral equations.
L: 48 T: 12 Total: 60

TEXT BOOK
1. Grewal, B.S., “Higher Engineering Mathematics”, Thirty eighth Edition, Khanna
Publishers, New Delhi, 2005.

REFERENCES
1. Glyn James., “Advanced Modern Engineering Mathematics”, Third Edition,Pearson Education Ltd, New Delhi, 2004.
2. Venkataraman. M. K., “Engineering Mathematics”, Volume I and II Revised enlarged Fourth Edition, The National Publishing Company, Chennai, 2004.
3. Veerarajan. T., “Engineering Mathematics (for first year)”, Fourth Edition, Tata McGraw – Hill Publishing Company Limited, New Delhi, 2005.
4. V. Sundaram, R. Balasubramanian, K.A. Lakshminarayanan, “Engineering Mathematics”, Fifth Edition, Vikas Publishing house Pvt. Ltd., New Delhi, 2006.

SEMESTER II PHYSICS AND CHEMISTRY LABORATORY II

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007
Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering)
SEMESTER II PHYSICS AND CHEMISTRY LABORATORY II

PHYSICS LABORATORY
L T P
0 0 2

LIST OF EXPERIMENTS (Any 6)
1. Determination of Young’s Modulus of a material of the bar - Uniform Bending
2. Thermal conductivity of a bad conductor - Lee’s Disc Method
3. Spectrometer : i-d curve
4. Determination of radius of curvature of a lens by Newton’s ring method
5. Spectrometer - Determination of wavelength of Hg spectrum using Grating
6. Determination of band gap of a semiconducting material.
7. Potentiometer - Measurement of resistance of the given wire.
8. Potentiometer - Determination of Thermo-emf using Thermo couple.
9. Logic Gates - OR,AND, NOT, NOR & NAND

CHEMISTRY LABORATORY
L T P
0 0 2
LIST OF EXPERIMENTS (Any 6)
1. Determination of chloride content of water sample by argentometric method.
2. Determination of strength of HCl by pH meter.
3. Estimation of copper in brass.
4. Determination of strength of iron by potentiometric method using dichromate.
5. Determination of molecular weight of a polymer by viscometry method.
6. Determination of percentage of calcium in limestone by EDTA method.
7. Determination of corrosion rate of given specimen by weight loss method.
8. Determination of BOD in sewage.
9. Determination of flue gas by Orsat method.
10. Determination of unknown dye concentration by spectrophotometer method.

REFERENCES

1. Textbook of Quantitative Inorganic Analysis, A.I. Vogel, ELBS, London.
2. Experiments in Physical Chemistry, D.P. Shoemaker and G.W. Garland,
McGraw Hill, London.

HS1152 ENGINEERING PHYSICS II SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering)
SEMESTER II
HS1152 ENGINEERING PHYSICS II

UNIT I CONDUCTING MATERIALS (10)
Classical free electron theory of metals – Thermal and Electrical conductivity –
Wiedemann–Franz law (Derivation) - Lorenz number – Drawbacks of classical theory –
Fermi distribution function – Density of energy states – Effect of temperature on Fermi
energy – Electron in a periodic potential (Kronig–Penney model) - Origin of band gap in
solids – Effective mass of electrons and holes.

UNIT II SEMICONDUCTING AND SUPERCONDUCTING MATERIALS 10
Intrinsic Semiconductor: Expressions for the carrier concentration – Calculation of
density of holes and electrons - Fermi level and its variation with temperature –
Determination of band gap energy.
Extrinsic Semiconductors: Carrier concentration in n-type and p-type semiconductors
(no derivation - qualitative) - Variation of Fermi level with temperature and impurity
concentration - Hall Effect – Determination of Hall coefficient.
Super Conductors: Superconductivity – Properties – Meissner effect – Type I and
Type II Superconductors – High temperature Super conductors – Applications –
Magnetic levitation – Josephson Effect – SQUID.

UNIT III MAGNETIC AND DIELECTRIC MATERIALS 11
Magnetic materials: Magnetic moment – Dia and Paramagnetism (qualitative) –
Ferromagnetism – Domain theory of Ferromagnetism – Antiferromagnetic – Ferrites:
Applications – Magnetic recording – Storage of magnetic data – Tapes, Floppy and
Magnetic disc devices – Magnetic memories – Ferrite core memory and Bubble memory.
Dielectric materials: Electronic, Ionic, Orientational and Space Charge polarisation –
Frequency and Temperature dependence of polarization – Internal field – Determination
of Clausius–Mosotti relation – Dielectric loss – Dielectric breakdown.

UNIT IV NON-DESTRUCTIVE TESTING 7
Liquid penetrant method – Ultrasonic flaw detector – X-ray radiography – X-ray
fluoroscopy – Thermography – Merits and Demerits of all methods.

UNIT V NEW ENGINEERING MATERIALS 10
Metallic glasses – Nanophase materials – Shape memory alloys (Thermal and Magnetic)
– Biomaterials (Metals and alloys, ceramics) – Nonlinear materials – Second harmonic
generation – Optical mixing.

Total: 48

TEXT BOOKS
1. Avadhanulu M.N. and Kshirsagar P.G., “A Text Book of Engineering Physics”, S.Chand & Company Ltd., 7th
Enlarged Revised Ed., 2005.
2. Pillai S.O., “Solid State Physics”, New Age International Publications, New Delhi, 6th Edition, 2005.

REFERENCES
1. Arumugam M., “Engineering Physics”, Anuradha Agencies, Kumbakonam, 2nd Edition, 2005.
2. Gaur R.K. and Gupta S.L., “Engineering Physics”, Dhanpat Rai Publishers, New Delhi, 2001.
3. Palanisamy P.K., “Physics for Engineers”, Scitech Publications (India) Pvt. Ltd., Chennai, 2nd
Edition, 2005.
4. Chitra Shadrach and Sivakumar Vadivelu, “Engineering Physics”, Pearson Education, 1st Edition, New Delhi, 2007.

SEMESTER II HS1153 ENGINEERING CHEMISTRY II SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering)
SEMESTER II HS1153 ENGINEERING CHEMISTRY II

UNIT I ENGINEERING MATERIALS 10
Abrasives – Natural abrasives (Diamond and Corundum) – Synthetic abrasives (Silicon
carbide and Boron carbide) – Refractories – Characteristics - Classification and
Properties – Manufacture of refractories (Alumina, Zirconia and Magnesite bricks)
Adhesives – Action - Classification with example - Lubricants - Classification with
example – Solid lubricants - Graphite - Molybdenum sulphide.

UNIT II CORROSION AND PROTECTIVE COATINGS 9
Principle of corrosion - Chemical and Electrochemical corrosion - Galvanic corrosion –
Differential aeration corrosion - Corrosion control methods - Cathodic protection -
Sacrificial anode - Corrosion inhibitors – Paints - Constituents – special paints - Fire
retardant - Water repellant - Temperature indicating paints - Varnishes and Lacquers -
Electroplating and Electroless plating - Surface conversion coating - Anodizing and Hot
dipping.

UNIT III HIGH POLYMERS 9
Preparation - Properties and Uses of PVC – Teflon – Polystyrene - Polycarbonate and
Thermo Cole – Resins - Urea-formaldehyde - Phenol-formaldehyde and Epoxy resins -
Compounding of Plastics - Injection moulding - Compression moulding.

UNIT IV FUELS AND COMBUSTION 10
Analysis of Coal - Proximate and Ultimate analysis - Coke manufacture - Otto Hoffman
method - Characteristics of metallurgical coke - Synthetic petrol - Bergius and Fischer
Tropsch method – Knocking - Octane number - Cetane number – Production,
Composition and Uses of producer and Water gas - Combustion – Gross and Net
Calorific value - Theoretical calculation of calorific values – Simple problems -
Calculation of minimum requirement of air - Simple problems - Flue gas analysis -
Orsat’s apparatus.

UNIT V CHEM-INFORMATICS 10
Definition – Coordinate – Bonds - Bond length - Bond angles - Torsional angles -
Chemical structure – Definition - Conformation – Representation of structural
information - Linear format - SMILEYF notation - MOL format- PDB format - Storage
of structural data in a data base - structural keys - Finger print - Canonical structure -
Similarity search - Sub structure search - Application of chem-informatics in drugs
designing.

Total: 48

TEXTBOOKS
1. P.C.Jain and Monika Jain, “Engineering Chemistry”, 13th Edition, Dhanpat Rai Publishing Company (P) Ltd., New Delhi, 2004.
2. Andrew Leach, “Molecular Modeling concept and Application”, 2nd edition, Pearson Edn., Ltd., ESSEX, England, 2001.

REFERENCES
1. J.C. Kuriakose and J. Rajaram, “Chemistry in Engineering and Technology”, Vol.1 & 2, Tata Mcgraw Hill Publishing Company, New Delhi, 1996.
2. Mars G. Fontana, “Corrosion Engineering”, Tata Mcgraw Hill Publishing Company (P) Ltd., New Delhi, 2005.
3. B.K. Sharma, “Engineering Chemistry”, Krishna Prakasam Media (P) Ltd., Meerut, 2001.

HS1152 ENGINEERING PHYSICS II SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering)
SEMESTER II
HS1152 ENGINEERING PHYSICS II

UNIT I CONDUCTING MATERIALS (10)
Classical free electron theory of metals – Thermal and Electrical conductivity –
Wiedemann–Franz law (Derivation) - Lorenz number – Drawbacks of classical theory –
Fermi distribution function – Density of energy states – Effect of temperature on Fermi
energy – Electron in a periodic potential (Kronig–Penney model) - Origin of band gap in
solids – Effective mass of electrons and holes.

UNIT II SEMICONDUCTING AND SUPERCONDUCTING MATERIALS 10
Intrinsic Semiconductor: Expressions for the carrier concentration – Calculation of
density of holes and electrons - Fermi level and its variation with temperature –
Determination of band gap energy.
Extrinsic Semiconductors: Carrier concentration in n-type and p-type semiconductors
(no derivation - qualitative) - Variation of Fermi level with temperature and impurity
concentration - Hall Effect – Determination of Hall coefficient.
Super Conductors: Superconductivity – Properties – Meissner effect – Type I and
Type II Superconductors – High temperature Super conductors – Applications –
Magnetic levitation – Josephson Effect – SQUID.

UNIT III MAGNETIC AND DIELECTRIC MATERIALS 11
Magnetic materials: Magnetic moment – Dia and Paramagnetism (qualitative) –
Ferromagnetism – Domain theory of Ferromagnetism – Antiferromagnetic – Ferrites:
Applications – Magnetic recording – Storage of magnetic data – Tapes, Floppy and
Magnetic disc devices – Magnetic memories – Ferrite core memory and Bubble memory.
Dielectric materials: Electronic, Ionic, Orientational and Space Charge polarisation –
Frequency and Temperature dependence of polarization – Internal field – Determination
of Clausius–Mosotti relation – Dielectric loss – Dielectric breakdown.

UNIT IV NON-DESTRUCTIVE TESTING 7
Liquid penetrant method – Ultrasonic flaw detector – X-ray radiography – X-ray
fluoroscopy – Thermography – Merits and Demerits of all methods.

UNIT V NEW ENGINEERING MATERIALS 10
Metallic glasses – Nanophase materials – Shape memory alloys (Thermal and Magnetic)
– Biomaterials (Metals and alloys, ceramics) – Nonlinear materials – Second harmonic
generation – Optical mixing.

Total: 48

TEXT BOOKS
1. Avadhanulu M.N. and Kshirsagar P.G., “A Text Book of Engineering Physics”, S.Chand & Company Ltd., 7th
Enlarged Revised Ed., 2005.
2. Pillai S.O., “Solid State Physics”, New Age International Publications, New Delhi, 6th Edition, 2005.

REFERENCES
1. Arumugam M., “Engineering Physics”, Anuradha Agencies, Kumbakonam, 2nd Edition, 2005.
2. Gaur R.K. and Gupta S.L., “Engineering Physics”, Dhanpat Rai Publishers, New Delhi, 2001.
3. Palanisamy P.K., “Physics for Engineers”, Scitech Publications (India) Pvt. Ltd., Chennai, 2nd
Edition, 2005.
4. Chitra Shadrach and Sivakumar Vadivelu, “Engineering Physics”, Pearson Education, 1st Edition, New Delhi, 2007.

SEMESTER II HS1153 ENGINEERING CHEMISTRY II SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering)
SEMESTER II HS1153 ENGINEERING CHEMISTRY II

UNIT I ENGINEERING MATERIALS 10
Abrasives – Natural abrasives (Diamond and Corundum) – Synthetic abrasives (Silicon
carbide and Boron carbide) – Refractories – Characteristics - Classification and
Properties – Manufacture of refractories (Alumina, Zirconia and Magnesite bricks)
Adhesives – Action - Classification with example - Lubricants - Classification with
example – Solid lubricants - Graphite - Molybdenum sulphide.

UNIT II CORROSION AND PROTECTIVE COATINGS 9
Principle of corrosion - Chemical and Electrochemical corrosion - Galvanic corrosion –
Differential aeration corrosion - Corrosion control methods - Cathodic protection -
Sacrificial anode - Corrosion inhibitors – Paints - Constituents – special paints - Fire
retardant - Water repellant - Temperature indicating paints - Varnishes and Lacquers -
Electroplating and Electroless plating - Surface conversion coating - Anodizing and Hot
dipping.

UNIT III HIGH POLYMERS 9
Preparation - Properties and Uses of PVC – Teflon – Polystyrene - Polycarbonate and
Thermo Cole – Resins - Urea-formaldehyde - Phenol-formaldehyde and Epoxy resins -
Compounding of Plastics - Injection moulding - Compression moulding.

UNIT IV FUELS AND COMBUSTION 10
Analysis of Coal - Proximate and Ultimate analysis - Coke manufacture - Otto Hoffman
method - Characteristics of metallurgical coke - Synthetic petrol - Bergius and Fischer
Tropsch method – Knocking - Octane number - Cetane number – Production,
Composition and Uses of producer and Water gas - Combustion – Gross and Net
Calorific value - Theoretical calculation of calorific values – Simple problems -
Calculation of minimum requirement of air - Simple problems - Flue gas analysis -
Orsat’s apparatus.

UNIT V CHEM-INFORMATICS 10
Definition – Coordinate – Bonds - Bond length - Bond angles - Torsional angles -
Chemical structure – Definition - Conformation – Representation of structural
information - Linear format - SMILEYF notation - MOL format- PDB format - Storage
of structural data in a data base - structural keys - Finger print - Canonical structure -
Similarity search - Sub structure search - Application of chem-informatics in drugs
designing.

Total: 48

TEXTBOOKS
1. P.C.Jain and Monika Jain, “Engineering Chemistry”, 13th Edition, Dhanpat Rai Publishing Company (P) Ltd., New Delhi, 2004.
2. Andrew Leach, “Molecular Modeling concept and Application”, 2nd edition, Pearson Edn., Ltd., ESSEX, England, 2001.

REFERENCES
1. J.C. Kuriakose and J. Rajaram, “Chemistry in Engineering and Technology”, Vol.1 & 2, Tata Mcgraw Hill Publishing Company, New Delhi, 1996.
2. Mars G. Fontana, “Corrosion Engineering”, Tata Mcgraw Hill Publishing Company (P) Ltd., New Delhi, 2005.
3. B.K. Sharma, “Engineering Chemistry”, Krishna Prakasam Media (P) Ltd., Meerut, 2001.

SEMESTER II GE1151 BASIC ENGINEERING SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering)
SEMESTER II GE1151 BASIC ENGINEERING

MECHANICAL ENGINEERING
UNIT I SOURCES OF ENERGY AND POWER PLANTS 6
Renewable and Non-renewable resources – Thermal Power Plant – Hydro-Electric Power
Plant – Nuclear Power Plant – Diesel Engine Power Plant – Gas Turbine Power Plant –
Solar Power Plant – Wind Power Generation.

UNIT II INTERNAL COMBUSTION 8
Engines – Working principle of Petrol and Diesel Engines – Four stroke and Two stroke
cycle – Fuel system in a Petrol Engine – Single jet carburetor – Coil ignition system –
Sparkplug – Cooling system in I.C. Engines – Lubrication system – Fuel system for
Diesel Engines – Fuel injector.

UNIT III BOILERS AND WELDING 8
Classification – Working of Cochran Boiler – Locomotive Boiler – Babcock and Wilcox
Boiler – Modern High Pressure Boilers – Lamont – Benson – Boiler Mountings –
Principle of welding – Types of welded joints – Arc welding – Gas welding – Resistance
welding – Spot welding – Gas cutting – Brazing – Soldering.

CIVIL ENGINEERING
UNIT IV BUILDING CONSTRUCTION AND FOUNDATION 6
Constructions: Properties - Uses of constructions materials namely Bricks, Stones,
Steel-sections, Cement, Cement concrete, Plywood, Plastics and Composite materials.
Foundation: Selection of site – Objectives of foundation – Requirement of good
foundation – Loads on foundation – Types of foundation.

UNIT V ROADS, BRIDGES, RAILWAYS AND WATER SUPPLY 8
Roads: Introduction – Advantages of good system of Roads – Classification of Roads,
Bridges: Introduction – Necessity of Bridges – Components of Bridges – Classification
of Bridges.
Railways: Introduction – Advantages of Railways – Railway track and Components of
Railway track.
Water Supply: Introduction – Objective of protected water supply – Steps involved on
planning water supply system – Per captia consumption and factors affecting per captia
consumption.
Total: 36



TEXT BOOKS
1. M.S. Palanichamy, C. Shanmugham, “Basic Civil Engineering and Basic
Mechanical Engineering”, Tata McGraw–Hill Publishing Company Ltd., 2000.

REFERENCES
1. K. Venugopal and V. Prabhu Raja, “Basic Mechanical Engineering”, 6th
Edition,
Anuradha Agencies, 2005.
2. R. Rudramoorthy, “Thermal Engineering”, Tata McGraw – Hill Publishing
Company Ltd, 2005.
3. S. Ramamrutham, “Basic Civil Engineering”, Dhanpat Rai Publishing Company
(P) Ltd., 1999.

HS1151 – TECHNICAL ENGLISH II SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering) SEMESTER II
HS1151 – TECHNICAL ENGLISH II

UNIT I FOCUS ON LANGUAGE 10
Voice and Tense – Reported Speech – Relative Clauses – Adverbial Clauses of Time,
Place and Manner - Cause and Effect Expressions – Indicators of Purpose and
Function – Acronyms and Abbreviations – British and American Vocabulary – Spelling,
Punctuation and Capitalization – Common Errors.

UNIT II INTERVIEWS AND GROUP COMMUNICATION 10
Interviews – Objective of Interviews – Types of Interviews – Job Interviews – Group
Discussion – Organizational Group Discussions – Group Discussion as part of a Selection
Process – Meetings – Conferences.

UNIT III LETTERS, MEMOS AND E-MAIL 10
Letters – Business Letters – Significance – Structure and Layout – Principles – Types and
Samples – Claim Letters – Adjustment Letters – Sales Letters – Job Application Letters –
Memos – Classification and Purpose – Style – E-mails – E-mail Etiquettes – Sample E-
mail Messages – Effectiveness and Security.

UNIT IV REPORTS 10
Reports – Objectives – Characteristics of a Report – Types of Reports – Importance of
Reports – Formats – Prewriting – Structure of Reports – Writing the Report – Visual
Aids – Revising, Editing and Proofreading – Proofreading Symbols.

UNIT V WRITING 8
Making Recommendations by using Modal Auxiliary Verbs like should, must, ought to
etc. – Preparation of Checklists – Giving Instructions.

Total: 48


TEXT BOOK
1. Meenakshi Raman and Sangeetha Sharma, “Technical Communication: Principles
and Practice”, Oxford University Press, New Delhi, 2004.

REFERENCES
1. Andrea J. Rutherford, “Basic Communication Skills for Technology”, Pearson Education Asia (Singapore) Pvt. Ltd., Bangalore, 2001.
2. Ashraf Rizvi, “Effective Technical Communication”, Tata McGraw-Hill, New Delhi, 2005.
3. Ramakrishna Rao, “Learning English : A communicative Approach”, Orient Longman, Hyderabad, 2006.
4. William Sanborn Pfeiffer and T.V.S. Padmaja, “Technical Communication: A Practical Approach”, Sixth Edition, Pearson Education, 2007.

SEMESTER II GE1151 BASIC ENGINEERING SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering)
SEMESTER II GE1151 BASIC ENGINEERING

MECHANICAL ENGINEERING
UNIT I SOURCES OF ENERGY AND POWER PLANTS 6
Renewable and Non-renewable resources – Thermal Power Plant – Hydro-Electric Power
Plant – Nuclear Power Plant – Diesel Engine Power Plant – Gas Turbine Power Plant –
Solar Power Plant – Wind Power Generation.

UNIT II INTERNAL COMBUSTION 8
Engines – Working principle of Petrol and Diesel Engines – Four stroke and Two stroke
cycle – Fuel system in a Petrol Engine – Single jet carburetor – Coil ignition system –
Sparkplug – Cooling system in I.C. Engines – Lubrication system – Fuel system for
Diesel Engines – Fuel injector.

UNIT III BOILERS AND WELDING 8
Classification – Working of Cochran Boiler – Locomotive Boiler – Babcock and Wilcox
Boiler – Modern High Pressure Boilers – Lamont – Benson – Boiler Mountings –
Principle of welding – Types of welded joints – Arc welding – Gas welding – Resistance
welding – Spot welding – Gas cutting – Brazing – Soldering.

CIVIL ENGINEERING
UNIT IV BUILDING CONSTRUCTION AND FOUNDATION 6
Constructions: Properties - Uses of constructions materials namely Bricks, Stones,
Steel-sections, Cement, Cement concrete, Plywood, Plastics and Composite materials.
Foundation: Selection of site – Objectives of foundation – Requirement of good
foundation – Loads on foundation – Types of foundation.

UNIT V ROADS, BRIDGES, RAILWAYS AND WATER SUPPLY 8
Roads: Introduction – Advantages of good system of Roads – Classification of Roads,
Bridges: Introduction – Necessity of Bridges – Components of Bridges – Classification
of Bridges.
Railways: Introduction – Advantages of Railways – Railway track and Components of
Railway track.
Water Supply: Introduction – Objective of protected water supply – Steps involved on
planning water supply system – Per captia consumption and factors affecting per captia
consumption.
Total: 36



TEXT BOOKS
1. M.S. Palanichamy, C. Shanmugham, “Basic Civil Engineering and Basic
Mechanical Engineering”, Tata McGraw–Hill Publishing Company Ltd., 2000.

REFERENCES
1. K. Venugopal and V. Prabhu Raja, “Basic Mechanical Engineering”, 6th
Edition,
Anuradha Agencies, 2005.
2. R. Rudramoorthy, “Thermal Engineering”, Tata McGraw – Hill Publishing
Company Ltd, 2005.
3. S. Ramamrutham, “Basic Civil Engineering”, Dhanpat Rai Publishing Company
(P) Ltd., 1999.

HS1151 – TECHNICAL ENGLISH II SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering) SEMESTER II
HS1151 – TECHNICAL ENGLISH II

UNIT I FOCUS ON LANGUAGE 10
Voice and Tense – Reported Speech – Relative Clauses – Adverbial Clauses of Time,
Place and Manner - Cause and Effect Expressions – Indicators of Purpose and
Function – Acronyms and Abbreviations – British and American Vocabulary – Spelling,
Punctuation and Capitalization – Common Errors.

UNIT II INTERVIEWS AND GROUP COMMUNICATION 10
Interviews – Objective of Interviews – Types of Interviews – Job Interviews – Group
Discussion – Organizational Group Discussions – Group Discussion as part of a Selection
Process – Meetings – Conferences.

UNIT III LETTERS, MEMOS AND E-MAIL 10
Letters – Business Letters – Significance – Structure and Layout – Principles – Types and
Samples – Claim Letters – Adjustment Letters – Sales Letters – Job Application Letters –
Memos – Classification and Purpose – Style – E-mails – E-mail Etiquettes – Sample E-
mail Messages – Effectiveness and Security.

UNIT IV REPORTS 10
Reports – Objectives – Characteristics of a Report – Types of Reports – Importance of
Reports – Formats – Prewriting – Structure of Reports – Writing the Report – Visual
Aids – Revising, Editing and Proofreading – Proofreading Symbols.

UNIT V WRITING 8
Making Recommendations by using Modal Auxiliary Verbs like should, must, ought to
etc. – Preparation of Checklists – Giving Instructions.

Total: 48


TEXT BOOK
1. Meenakshi Raman and Sangeetha Sharma, “Technical Communication: Principles
and Practice”, Oxford University Press, New Delhi, 2004.

REFERENCES
1. Andrea J. Rutherford, “Basic Communication Skills for Technology”, Pearson Education Asia (Singapore) Pvt. Ltd., Bangalore, 2001.
2. Ashraf Rizvi, “Effective Technical Communication”, Tata McGraw-Hill, New Delhi, 2005.
3. Ramakrishna Rao, “Learning English : A communicative Approach”, Orient Longman, Hyderabad, 2006.
4. William Sanborn Pfeiffer and T.V.S. Padmaja, “Technical Communication: A Practical Approach”, Sixth Edition, Pearson Education, 2007.

SEMESTER II COMPUTER LABORATORY SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering)
SEMESTER II COMPUTER LABORATORY

The students should be taught C programming in class room session followed by
programming practice in the lab session.
LIST OF EXERCISES

Unit Concepts Suggested Exercises
Introduction to Application
Packages
Practical Exercises may be given in the application packages to
acquire skills in word processing and presentation

Word
1. To create an advertisement in word.
2. To illustrate the concept of mail merging, importing
images, tables in word.
Spreadsheet
3. To create a spread sheet to analyze the marks of the
students of a class and also to create appropriate charts.
UNIT I
Power Point
4. To create the presentation for the department with Power
Point using animation, Design Templates and Effective
presentation.
C Programming Basics
The following exercises may be suggested

Operators & Expressions
5. To write a simple menu driven calculator program using
switch statement,
6. To Find Age in terms of years, months and days.
IO Formatting 7. To print multiplication table for the given number.
Decision Making
8. To check and print if the given number is a palindrome or
not, and the given number is a prime number or not
UNIT II
Looping 9. To print Fibonacci and Trigonometric series.

UNIT III
Exercises may be given to understand function prototype and
invocation procedures, to understand call by value, call by
address and implement recursion.

10. To find the largest and smallest number using array
11. To Sort numbers in an array in ascending / Descending
order.
12. To implement bubble sorting.
13. To reverse the elements given in an array.
Arrays
14. Write a program for matrix addition and multiplication
15. To implement string manipulation functions without using
library functions. String Manipulations
16. To arrange the names in alphabetic order.
Functions 17. To perform sequential search using functions.
UNIT III
Recursions 18. To find the factorial of a number using recursion.
Structures 19. To print the marksheet of ‘n’ students using structures.
Pointers
20. To print the elements of an array using pointers and
String manipulation.

UNIT IV
Files
21. To print the marksheet of ‘n’ students using file handling
operations.
UNIT V Command line arguments 1. To merge two files using command line arguments.

SEMESTER II ENGINEERING DRAWING LABORATORY SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech. (Except B.E. Marine Engineering)
SEMESTER II ENGINEERING DRAWING LABORATORY

UNIT I BASICS OF CAD 8
Concepts - Loading AutoCAD - Main menu operations - Drawing editor usage – Data
entry - Coordinates - Absolute, Relative, Polar – Pointing – Keyboard - Using cursor
control keys-numeric values – angles – displacements – Modifiers - Filename - Special
Input Formats –Variables - Arithmetic expressions.

UNIT II UTILITY COMMANDS 8
Draw commands-Point, Line, Circle, Arc, Trace, Pline, Solid, Text, Shapes – Modifying
commands - Erase, Oops, Move, Copy, Mirror, Break, Fillet, Chamfer, Array, Repeat,
Endrep, Pedit, List, Oblist, Dist, Id, Area, Zoom, Pan, View, Redraw, Regen, Auto, Fill,
Qtext modes-blip, Drag.

UNIT III ADVANCED UTILITY COMMANDS 7
Dimensioning – Angular, Diameter, Radius - Utility Commands – Centre, Exit, Leader,
Redraw, Status, Undo, Dimvariables, Hatching – Pattern – Slide – Mslide – Attributes –
Attdisp, Attedit, Atttext - Advanced Features - Table Sketch.

UNIT IV LAYERS AND ISOMETRIC DRAWING 6
Colours - Line types - LT Scale - Drawing aids - Snap, Grid, Axis, Isoplane, Osnap,
Apeture, Block, Insert, Base - Simple practices on Isometric drawing.

UNIT V 3D MODELING 7
Slice - 3D Rotate – Union - Mass Properties of 3D Solids - Creation of Objects Like
Spheres, Box, Cylinder, Cone, Torus - Intersection of Solids – Intersection of Cylinder
and Cylinder, Cone and Cylinder, Prism and Prism, Cylinder and Prism.

Total: 36

TEXT BOOKS
1. George Omura, “Mastering AUTOCAD 2000”, BPB Publications, New Delhi, 1999.
2. Michael E. Beall and Howard M. Fulmer, “AUTOCAD 14 Fundamentals”, Techmedia, New Delhi, 1997.

REFERENCES
1. Michael E. Beall and Bill Burchard, “AUTOCAD 14 INSIDE”, Techmedia, New Delhi, 1997.
2. N. Poleshchuk, “AUTOCAD Developer’s Guide to Visual LISP”, Eswar Press, Chennai, 2003.

SEMESTER II COMPUTER LABORATORY SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech.
(Except B.E. Marine Engineering)
SEMESTER II COMPUTER LABORATORY

The students should be taught C programming in class room session followed by
programming practice in the lab session.
LIST OF EXERCISES

Unit Concepts Suggested Exercises
Introduction to Application
Packages
Practical Exercises may be given in the application packages to
acquire skills in word processing and presentation

Word
1. To create an advertisement in word.
2. To illustrate the concept of mail merging, importing
images, tables in word.
Spreadsheet
3. To create a spread sheet to analyze the marks of the
students of a class and also to create appropriate charts.
UNIT I
Power Point
4. To create the presentation for the department with Power
Point using animation, Design Templates and Effective
presentation.
C Programming Basics
The following exercises may be suggested

Operators & Expressions
5. To write a simple menu driven calculator program using
switch statement,
6. To Find Age in terms of years, months and days.
IO Formatting 7. To print multiplication table for the given number.
Decision Making
8. To check and print if the given number is a palindrome or
not, and the given number is a prime number or not
UNIT II
Looping 9. To print Fibonacci and Trigonometric series.

UNIT III
Exercises may be given to understand function prototype and
invocation procedures, to understand call by value, call by
address and implement recursion.

10. To find the largest and smallest number using array
11. To Sort numbers in an array in ascending / Descending
order.
12. To implement bubble sorting.
13. To reverse the elements given in an array.
Arrays
14. Write a program for matrix addition and multiplication
15. To implement string manipulation functions without using
library functions. String Manipulations
16. To arrange the names in alphabetic order.
Functions 17. To perform sequential search using functions.
UNIT III
Recursions 18. To find the factorial of a number using recursion.
Structures 19. To print the marksheet of ‘n’ students using structures.
Pointers
20. To print the elements of an array using pointers and
String manipulation.

UNIT IV
Files
21. To print the marksheet of ‘n’ students using file handling
operations.
UNIT V Command line arguments 1. To merge two files using command line arguments.

SEMESTER II ENGINEERING DRAWING LABORATORY SYLLABUS

ANNA UNIVERSITY TIRUCHIRAPPALLI 620 024
Regulations 2007 Syllabus Common to all B.E. / B.Tech. (Except B.E. Marine Engineering)
SEMESTER II ENGINEERING DRAWING LABORATORY

UNIT I BASICS OF CAD 8
Concepts - Loading AutoCAD - Main menu operations - Drawing editor usage – Data
entry - Coordinates - Absolute, Relative, Polar – Pointing – Keyboard - Using cursor
control keys-numeric values – angles – displacements – Modifiers - Filename - Special
Input Formats –Variables - Arithmetic expressions.

UNIT II UTILITY COMMANDS 8
Draw commands-Point, Line, Circle, Arc, Trace, Pline, Solid, Text, Shapes – Modifying
commands - Erase, Oops, Move, Copy, Mirror, Break, Fillet, Chamfer, Array, Repeat,
Endrep, Pedit, List, Oblist, Dist, Id, Area, Zoom, Pan, View, Redraw, Regen, Auto, Fill,
Qtext modes-blip, Drag.

UNIT III ADVANCED UTILITY COMMANDS 7
Dimensioning – Angular, Diameter, Radius - Utility Commands – Centre, Exit, Leader,
Redraw, Status, Undo, Dimvariables, Hatching – Pattern – Slide – Mslide – Attributes –
Attdisp, Attedit, Atttext - Advanced Features - Table Sketch.

UNIT IV LAYERS AND ISOMETRIC DRAWING 6
Colours - Line types - LT Scale - Drawing aids - Snap, Grid, Axis, Isoplane, Osnap,
Apeture, Block, Insert, Base - Simple practices on Isometric drawing.

UNIT V 3D MODELING 7
Slice - 3D Rotate – Union - Mass Properties of 3D Solids - Creation of Objects Like
Spheres, Box, Cylinder, Cone, Torus - Intersection of Solids – Intersection of Cylinder
and Cylinder, Cone and Cylinder, Prism and Prism, Cylinder and Prism.

Total: 36

TEXT BOOKS
1. George Omura, “Mastering AUTOCAD 2000”, BPB Publications, New Delhi, 1999.
2. Michael E. Beall and Howard M. Fulmer, “AUTOCAD 14 Fundamentals”, Techmedia, New Delhi, 1997.

REFERENCES
1. Michael E. Beall and Bill Burchard, “AUTOCAD 14 INSIDE”, Techmedia, New Delhi, 1997.
2. N. Poleshchuk, “AUTOCAD Developer’s Guide to Visual LISP”, Eswar Press, Chennai, 2003.

AT1621 ADVANCES IN YARN MANUFACTURE M.TECH APPAREL TECHNOLOGY AND MANAGEMENT

ANNA UNIVERSITY :: CHENNAI 600 025
CURRICULUM 2005 – FULL TIME MODE
M.TECH APPAREL TECHNOLOGY AND MANAGEMENT

AT1621 ADVANCES IN YARN MANUFACTURE 3 0 0 100

1. DEVELOPMENTS IN RING SPINNING 8

Limitation of apron-drafting in ring-spinning; Constraints in ring-twisting; Technological concepts of designing rings and traveller profiles for high spindle speed; Principle of condensed yarn spinning; Comparison of different methods of condensed yarn spinning; Condensed yarn quality vis-à-vis conventional ring yarn quality.

2. ROTOR SPINNING 10
Principle of open-end spinning; the advantages of open-end spinning over ring spinning; Principle of operation of rotor spinning; Raw material requirement; Spinning preparatory processes; Developments in fibre-opening and fibre transport in rotor spinning; Yarn formation – latest developments in rotor geometry and its variables; Yarn withdrawal and winding – modifications in draw-off nozzle profile for production different types of yarns; Yarn structure and its properties; Economics of rotor spinning, Limitation of fine count spinning.

3. FRICTION SPINNING 9
Principle of friction spinning; Working of various friction spinning machines – Masterspinner, DREF 2, DREF 3, DREF 5 machines; Study of yarn formation and yarn characteristics; Effect of process parameters on spinning performance and yarn quality; Production of specialty yarns; Application fields for these yarns; Advantages and limitations of friction spinning; Latest developments in friction spinning – DREF 2000 and DREF 3000 friction machines.

4. APPLICATION OF FALSE-TWISTING 9
Principle of false twisting; Application of false-twist principle in Air-jet spinning, Wrap spinning, DREF-3 friction spinning, PLY-Fil spinning, Self-twist spinning; Operating principle, strength and weakness of the above processes; Analysis of yarn structure and characteristics; Latest developments in air-jet spinning.

5. OTHER NEW SPINNING SYSTEMS 9
The basic principle of yarn formation in Electrostatic spinning and Air-vortex spinning; Method of yarn production in Siro spinning, Solo spinning, Twilo spinning and Bobtex spinning processes; Limitations of these new spinning systems; Advances in Vortex spinning and concept of Single Step Spinning process.

TOTAL : 45 Hours

REFERENCES

1. Klein W, New Spinning Systems, The Textile Institute, Manchester, 1993. ISBN: 1870812557.
2. Gowda RVM, New Spinning Systems, NCUTE, New Delhi, 2003.
3. Chattopadhyay R. (Ed), Advances in Technology of Yarn Production, NCUTE, IIT Delhi, 2002.
4. Dyson E, Rotor Spinning, Technical and Economic Aspects, Textile Trade Press, New Mills, Stock Port, 1975, ISBN: 0903772116.
5. Lord P R, Yarn Production: Science, Technology and Economics, The Textile Institute, Manchester, 1999.
6. Lawrance C A and Chen K Z, Rotor Spinning, Textile Progress, Vol. 13, No.4, The Textile Institute, Manchester, 1984. ISBN: 0900739681.
7. Basu A., "Progress in Air-jet Spinning", Textile Progress, Vol. 29, No.3, Textile Institute, U.K., 1997.
8. Ishtiaque, S.M., Salhotra K.R. and Gowda R.V.M, "Friction Spinning", Textile Progress, Vol. 33, No.2, Textile Institute, U.K., 2001.

AT1621 ADVANCES IN YARN MANUFACTURE M.TECH APPAREL TECHNOLOGY AND MANAGEMENT

ANNA UNIVERSITY :: CHENNAI 600 025
CURRICULUM 2005 – FULL TIME MODE
M.TECH APPAREL TECHNOLOGY AND MANAGEMENT

AT1621 ADVANCES IN YARN MANUFACTURE 3 0 0 100

1. DEVELOPMENTS IN RING SPINNING 8

Limitation of apron-drafting in ring-spinning; Constraints in ring-twisting; Technological concepts of designing rings and traveller profiles for high spindle speed; Principle of condensed yarn spinning; Comparison of different methods of condensed yarn spinning; Condensed yarn quality vis-à-vis conventional ring yarn quality.

2. ROTOR SPINNING 10
Principle of open-end spinning; the advantages of open-end spinning over ring spinning; Principle of operation of rotor spinning; Raw material requirement; Spinning preparatory processes; Developments in fibre-opening and fibre transport in rotor spinning; Yarn formation – latest developments in rotor geometry and its variables; Yarn withdrawal and winding – modifications in draw-off nozzle profile for production different types of yarns; Yarn structure and its properties; Economics of rotor spinning, Limitation of fine count spinning.

3. FRICTION SPINNING 9
Principle of friction spinning; Working of various friction spinning machines – Masterspinner, DREF 2, DREF 3, DREF 5 machines; Study of yarn formation and yarn characteristics; Effect of process parameters on spinning performance and yarn quality; Production of specialty yarns; Application fields for these yarns; Advantages and limitations of friction spinning; Latest developments in friction spinning – DREF 2000 and DREF 3000 friction machines.

4. APPLICATION OF FALSE-TWISTING 9
Principle of false twisting; Application of false-twist principle in Air-jet spinning, Wrap spinning, DREF-3 friction spinning, PLY-Fil spinning, Self-twist spinning; Operating principle, strength and weakness of the above processes; Analysis of yarn structure and characteristics; Latest developments in air-jet spinning.

5. OTHER NEW SPINNING SYSTEMS 9
The basic principle of yarn formation in Electrostatic spinning and Air-vortex spinning; Method of yarn production in Siro spinning, Solo spinning, Twilo spinning and Bobtex spinning processes; Limitations of these new spinning systems; Advances in Vortex spinning and concept of Single Step Spinning process.

TOTAL : 45 Hours

REFERENCES

1. Klein W, New Spinning Systems, The Textile Institute, Manchester, 1993. ISBN: 1870812557.
2. Gowda RVM, New Spinning Systems, NCUTE, New Delhi, 2003.
3. Chattopadhyay R. (Ed), Advances in Technology of Yarn Production, NCUTE, IIT Delhi, 2002.
4. Dyson E, Rotor Spinning, Technical and Economic Aspects, Textile Trade Press, New Mills, Stock Port, 1975, ISBN: 0903772116.
5. Lord P R, Yarn Production: Science, Technology and Economics, The Textile Institute, Manchester, 1999.
6. Lawrance C A and Chen K Z, Rotor Spinning, Textile Progress, Vol. 13, No.4, The Textile Institute, Manchester, 1984. ISBN: 0900739681.
7. Basu A., "Progress in Air-jet Spinning", Textile Progress, Vol. 29, No.3, Textile Institute, U.K., 1997.
8. Ishtiaque, S.M., Salhotra K.R. and Gowda R.V.M, "Friction Spinning", Textile Progress, Vol. 33, No.2, Textile Institute, U.K., 2001.

AT1653 APPLIED OPERATIONS RESEARCH FOR MANAGEMENT M.TECH APPAREL TECHNOLOGY AND MANAGEMENT

ANNA UNIVERSITY :: CHENNAI 600 025
CURRICULUM 2005 – FULL TIME MODE
M.TECH APPAREL TECHNOLOGY AND MANAGEMENT

AT1653 APPLIED OPERATIONS RESEARCH FOR MANAGEMENT 3 0 0 100

Aim
To impart knowledge on operational research in terms of linear programming application to optimization, transportation and game theory, project scheduling and decision theory.

1. LINEAR PROGRAMMING TECHNIQUES: 10

Graphical and Simplex solution for maximizing and minimizing problems – A case of degeneracy in Simplex method – Post optimality analysis, Sensitivity Analysis, Parametric programming – Revised Simplex problem – primal / dual relationship – Goal programming

1. LINEAR PROGRAMMING EXTENSIONS: 15

Transportation problem – North / West corner Solution, stepping stone method, Vogel’s approximate method, Modi method – Degeneracy, imbalance matrix. Assignment model: Branch and Bound Technique, Hungarian method,Trans-shipment problem, Travelling salesmen problem.
3. INTEGER LINEAR PROGRAMMING / GAME THEORY 9
Branch and bound Algorithm, Cutting plane algorithm, the fractional Algorithm, the mixed algorithm, zero-one Integer problem techniques – the additive algorithm, zero-one polynomial programming. Two person – zero sum games: Graphical and L.P. Solutions.
4. DYNAMIC PROGRAMMING AND PROJECT SCHEDULING: 15
Dynamic programming models: Deterministic case. Maximization and Minimization problem. Use of the D.P. techniques to solve the L.P. problems. C.P.M. and P.E.R.T. for Project Scheduling. Resource levelling, crashing, Resource planning.
5. DECISION THEORY: 6
Decision under risk, Decision trees, Decision under uncertainty. Use of Simulation technique for decision making. Case studies for the use of Simulation techniques for decision making. Optimal Simulation run.

TOTAL : 45 Hours

TEXT BOOKS

1. R. Panneerselvam, “Operations Research”, Prentice Hall of India, 2002.
2. P.C.Tulsin, “Quantitative Techniques: Theory and Problems”, Pearson Education, 2002.
3. Ronald L. Rardin, “Optimization in Operations Research” Pearson Education, 1998.
4. Hillier and Lieberman, “Introduction to Operations Research”, McGraw-Hill International Edition, Seventh Edition, 2001
5. Hamdy A Taha, “An Introduction to Operations Research, Prentice Hall, Sixth edition, 2000.
6. Ravindran, Phillips, Solberg, “Operations Research: Principles and practice”, Second edition, John Wiley, 1987.

REFERENCE BOOKS

• U.K. Srivastava, G.V. Shenoy, S. C. Sharma, “ Quantitative Techniques for Managerial Decision”, Second Edition, Prentice Hall of India, 2001
• P. K. Gupta, D.S.Hira, “ Problems in Operations Research”, S. Chand & Company, 2002.
• P.K. Gupta and D.S. Hira, “Operations Research”, S. Chand & Co. Ltd., New Delhi, 2002.
• J. K. Sharma, “Operations Research: Theory and Applications”, Macmillan, 1997.
• C.K. Mustafi, “Operations Research: Methods and Practice”, New Age International (P) Ltd. Publisher, 2000.
• S. Kalavathy, “ Operations Research”, Vikas Publishing House (P) Ltd., 2000

AT1653 APPLIED OPERATIONS RESEARCH FOR MANAGEMENT M.TECH APPAREL TECHNOLOGY AND MANAGEMENT

ANNA UNIVERSITY :: CHENNAI 600 025
CURRICULUM 2005 – FULL TIME MODE
M.TECH APPAREL TECHNOLOGY AND MANAGEMENT

AT1653 APPLIED OPERATIONS RESEARCH FOR MANAGEMENT 3 0 0 100

Aim
To impart knowledge on operational research in terms of linear programming application to optimization, transportation and game theory, project scheduling and decision theory.

1. LINEAR PROGRAMMING TECHNIQUES: 10

Graphical and Simplex solution for maximizing and minimizing problems – A case of degeneracy in Simplex method – Post optimality analysis, Sensitivity Analysis, Parametric programming – Revised Simplex problem – primal / dual relationship – Goal programming

1. LINEAR PROGRAMMING EXTENSIONS: 15

Transportation problem – North / West corner Solution, stepping stone method, Vogel’s approximate method, Modi method – Degeneracy, imbalance matrix. Assignment model: Branch and Bound Technique, Hungarian method,Trans-shipment problem, Travelling salesmen problem.
3. INTEGER LINEAR PROGRAMMING / GAME THEORY 9
Branch and bound Algorithm, Cutting plane algorithm, the fractional Algorithm, the mixed algorithm, zero-one Integer problem techniques – the additive algorithm, zero-one polynomial programming. Two person – zero sum games: Graphical and L.P. Solutions.
4. DYNAMIC PROGRAMMING AND PROJECT SCHEDULING: 15
Dynamic programming models: Deterministic case. Maximization and Minimization problem. Use of the D.P. techniques to solve the L.P. problems. C.P.M. and P.E.R.T. for Project Scheduling. Resource levelling, crashing, Resource planning.
5. DECISION THEORY: 6
Decision under risk, Decision trees, Decision under uncertainty. Use of Simulation technique for decision making. Case studies for the use of Simulation techniques for decision making. Optimal Simulation run.

TOTAL : 45 Hours

TEXT BOOKS

1. R. Panneerselvam, “Operations Research”, Prentice Hall of India, 2002.
2. P.C.Tulsin, “Quantitative Techniques: Theory and Problems”, Pearson Education, 2002.
3. Ronald L. Rardin, “Optimization in Operations Research” Pearson Education, 1998.
4. Hillier and Lieberman, “Introduction to Operations Research”, McGraw-Hill International Edition, Seventh Edition, 2001
5. Hamdy A Taha, “An Introduction to Operations Research, Prentice Hall, Sixth edition, 2000.
6. Ravindran, Phillips, Solberg, “Operations Research: Principles and practice”, Second edition, John Wiley, 1987.

REFERENCE BOOKS

• U.K. Srivastava, G.V. Shenoy, S. C. Sharma, “ Quantitative Techniques for Managerial Decision”, Second Edition, Prentice Hall of India, 2001
• P. K. Gupta, D.S.Hira, “ Problems in Operations Research”, S. Chand & Company, 2002.
• P.K. Gupta and D.S. Hira, “Operations Research”, S. Chand & Co. Ltd., New Delhi, 2002.
• J. K. Sharma, “Operations Research: Theory and Applications”, Macmillan, 1997.
• C.K. Mustafi, “Operations Research: Methods and Practice”, New Age International (P) Ltd. Publisher, 2000.
• S. Kalavathy, “ Operations Research”, Vikas Publishing House (P) Ltd., 2000