Tuesday, May 18, 2010

B.E DEGREE PROGRAMME CIVIL ENGINEERING SEMESTER VII /07 SYLLABUS ANNA UNIVERSITY CHENNAI:


ANNA UNIVERSITY CHENNAI: CHENNAI – 600 025
B.E DEGREE PROGRAMME CIVIL ENGINEERING
(Offered in Colleges affiliated to Anna University)
CURRICULUM AND SYLLABUS – REGULATIONS – 2004
SEMESTER VII
     
        (Applicable to the students admitted from the Academic year 2006 – 2007 onwards)
Code No. Course Title L T P M
THEORY
CE1401 Design of RC and Reinforced Brick Masonry Structures 4 2 0 100
CE1402 Estimation and Quantity Surveying 3 0 0 100
CE1403 Basics of Dynamics and Aseismic Design 3 0 0 100
CE1404 Building Services 3 0 0 100
E3*** Elective – III 3 0 0 100
E4*** Elective – IV        
PRACTICAL
CE1405 Computer Aided Design and Drafting Laboratory 0 0 4 100
CE1406 Design Project 0 0 4 100

CE1401             DESIGN OF REINFORCED CONCRETE & BRICK MASONRY STRUCTURES                                                                              4  2  0  100
                                                                                                                       

OBJECTIVE
This course covers the design of Reinforced Concrete Structures such as Retaining Wall, Water Tanks, Staircases, Flat slabs and Principles of design pertaining to Box culverts, Mat foundation and Bridges. At the end of the course student has a comprehensive design knowledge related to structures, systems that are likely to be encountered in professional practice.
1.         RETAINING WALLS                                                                                                  12
Design of cantilever and counter fort retaining walls
2.         WATER TANKS                                                                                                         12
Underground rectangular tanks – Domes – Overhead circular and rectangular tanks – Design of staging and foundations
3.         SELECTED TOPICS                                                                                                  12
Design of staircases (ordinary and doglegged) – Design of flat slabs – Design of Reinforced concrete walls – Principles of design of mat foundation, box culvert and road bridges
4.         YIELD LINE THEORY                                                                                               12
Application of virtual work method to square, rectangular, circular and triangular slabs     
5.         BRICK MASONRY                                                                                                     12
Introduction, Classification of walls, Lateral supports and stability, effective height of wall and columns, effective length of walls, design loads, load dispersion, permissible stresses, design of axially and eccentrically loaded brick walls
                                                                                                                
TUTORIAL    30
                                                                                                            TOTAL : 90
TEXT BOOKS
1.         Krishna Raju, N., “Design of RC Structures”, CBS Publishers and Distributors, Delhi
2.         Dayaratnam, P., “Brick and Reinforced Brick Structures”, Oxford & IBH Publishing House, 1997
3.         Varghese, P.C., “Limit State Design of Reinforced Concrete Structures”
REFERENCES
1.         Mallick, D.K. and Gupta A.P., “Reinforced Concrete”, Oxford and IBH Publishing Company
2.         Syal, I.C. and Goel, A.K., “Reinforced Concrete Structures”, A.H. Wheelers & Co. Pvt. Ltd., 1994
3.         Ram Chandra, “Limit State Design”, Standard Book House.

CE1402 ESTIMATION AND QUANTITY SURVEYING                              3  0  0  100

OBJECTIVE                                                                                         
This subject covers the various aspects of estimating of quantities of items of works involved in buildings, water supply and sanitary works, road works and irrigation works. This also covers the rate analysis, valuation of properties and preparation of reports for estimation of various items.  At the end of this course the student shall be able to estimate the material quantities, prepare a bill of quantities, make specifications and prepare tender documents. Student should also be able to prepare value estimates.
1.         INTRODUCTION                                                                                                          3
Types of estimates – Units of measurements – Methods of estimates – Advantages
2.         ESTIMATE OF BUILDINGS                                                                                       12
Load bearing and framed structures – Calculation of quantities of brick work, RCC, PCC, Plastering, white washing, colour washing and painting / varnishing for shops, rooms, residential building with flat and pitched roof – Various types of arches – Calculation of brick work and RCC works in arches – Estimate of joineries for panelled and glazed doors, windows, ventilators, handrails etc.
3.         ESTIMATE OF OTHER STRUCTURES                                                                       12
Estimating of septic tank, soak pit – sanitary and water supply installations – water supply pipe line – sewer line – tube well – open well – estimate of bituminous and cement concrete roads – estimate of retaining walls – culverts – estimating of irrigation works – aqueduct, syphon, fall.
4.         SPECIFICATION AND TENDERS                                                                                 6
Data – Schedule of rates – Analysis of rates – Specifications – sources – Detailed and general specifications – Tenders – Contracts – Types of contracts – Arbitration and legal requirements.
5.         VALUATION                                                                                                               6
Necessity – Basics of value engineering – Capitalised value – Depreciation – Escalation – Value of building – Calculation of Standard rent – Mortage – Lease
6.         REPORT PREPARATION                                                                                            6
Principles for report preparation – report on estimate of residential building – Culvert – Roads – Water supply and sanitary installations – Tube wells – Open wells.

                                                                                                            TOTAL : 45
TEXT BOOKS
1.         Dutta, B.N., “Estimating and Costing in Civil Engineering”, UBS Publishers & Distributors Pvt. Ltd., 2003
2.         Kohli, D.D and Kohli, R.C., “A Text Book of Estimating and Costing (Civil)”, S.Chand & Company Ltd., 2004


CE1403             BASICS OF DYNAMICS AND ASEISMIC DESIGN                      3  0  0  100

 

OBJECTIVE                                                                                                     

The main objective of this course is to introduce to the student the phenomena of earthquakes, the process, measurements and the factors that affect the design of structures in seismic areas. This objective is achieved through imparting rudiments of theory of vibrations necessary to understand and analyse the dynamic forces caused by earthquakes and structures. Further, the student is also taught the codal provisions as well as the aseismic design methodology.

1.         THEORY OF VIBRATIONS                                                                                          9

Concept of inertia and damping – Types of Damping – Difference between static forces and dynamic excitation – Degrees of freedom – SDOF idealisation – Equations of motion of SDOF system for mass as well as base excitation – Free vibration of SDOF system – Response to harmonic excitation – Impulse and response to unit impulse – Duhamel integral
2.         MULTIPLE DEGREE OF FREEDOM SYSTEM                                                             9
Two degree of freedom system – Normal modes of vibration – Natural frequencies - Mode shapes  - Introduction to MDOF systems – Decoupling of equations of motion – Concept of mode superposition (No derivations).
3.         ELEMENTS OF SEISMOLOGY                                                                                   9
Causes of Earthquake – Geological faults – Tectonic plate theory – Elastic rebound – Epicentre – Hypocentre – Primary, shear and Raleigh waves – Seismogram – Magnitude and intensity of earthquakes – Magnitude and Intensity scales – Spectral Acceleration - Information on some disastrous earthquakes
4.         RESPONSE OF STRUCTURES TO EARTHQUAKE                                                     9
Response and design spectra – Design earthquake – concept of peak acceleration – Site specific response spectrum – Effect of soil properties and damping – Liquefaction of soils – Importance of ductility – Methods of introducing ductility into RC structures.
5.         DESIGN METHODOLOGY                                                                                           9
IS 1893, IS 13920 and IS 4326 – Codal provisions – Design as per the codes – Base isolation techniques – Vibration control measures – Important points in mitigating effects of earthquake on structures.
                                                                                                             TOTAL : 45
TEXT BOOKS
  1. Arya, A.S., ed., “Earthquake Engineering”, Jai Krishna 60th Birthday Anniversary Commemoration Volume, ISET, Sarita Prakashan, Meerut, 1974.
  2. Chopra, A.K., “Dynamics of Structures – Theory and Applications to Earthquake Engineering”, Second Edition, Pearson Education, 2003.

 

REFERENCES
  1. Biggs, J.M., “Introduction to Structural Dynamics”, McGraw–Hill Book Co., N.Y., 1964
  2. Dowrick, D.J., “Earthquake Resistant Design”, John Wiley & Sons, London, 1977
  3. Paz, M., “Structural Dynamics – Theory & Computation”, CSB Publishers & Distributors, Shahdara, Delhi, 1985
  4. NPEEE Publications

CE1404             BUILDING SERVICES                                                   3  0  0  100

OBJECTIVE                                                                                                     
This subject covers the various aspects of pumps and machinery involved in Civil Engineering practice and the principles of electrical and air conditioning facilities involved. Building water supply and drainage have been covered under subjects namely Environmental Engineering and Environmental Engineering Drawing.
1.         MACHINERIES                                                                                                            8
Hot Water Boilers – Lifts and Escalators – Special features required for physically handicapped and elderly – Conveyors – Vibrators – Concrete mixers – DC/AC motors – Generators – Laboratory services – Gas, water, air and electricity
2.         ELECTRICAL SYSTEMS IN BUILDINGS                                                                    10
Basics of electricity – Single / Three phase supply – Protective devices in electrical installations – Earthing for safety – Types of earthing – ISI specifications – Types of wires, wiring systems and their choice – Planning electrical wiring for building – Main and distribution boards – Transformers and switch gears – Layout of substations
3.         PRINCIPLES OF ILLUMINATION & DESIGN                                                                8
Visual tasks – Factors affecting visual tasks – Modern theory of light and colour – Synthesis of light – Additive and subtractive synthesis of colour – Luminous flux – Candela – Solid angle illumination – Utilisation factor – Depreciation factor – MSCP – MHCP – Lans of illumination – Classification of lighting – Artificial light sources – Spectral energy distribution – Luminous efficiency – Colour temperature – Colour rendering.
Design of modern lighting – Lighting for stores, offices, schools, hospitals and house lighting. Elementary idea of special features required and minimum level of illumination required for physically handicapped and elderly in building types.
4.         REFRIGERATION PRINCIPLES & APPLICATIONS                                                    10
Thermodynamics – Heat – Temperature, measurement transfer – Change of state – Sensible heat – Latent heat of fusion, evaporation, sublimation – saturation temperature – Super heated vapour – Subcooled liquid – Pressure temperature relationship for liquids – Refrigerants – Vapour compression cycle – Compressors – Evaporators – Refrigerant control devices – Electric motors – Starters – Air handling units – Cooling towers – Window type and packaged air-conditioners – Chilled water plant – Fan coil systems – Water piping – Cooling load – Air conditioning systems for different types of buildings – Protection against fire to be caused by A.C. Systems
5.         FIRE SAFETY INSTALLATION                                                                                    9
Causes of fire in buildings – Safety regulations – NBC – Planning considerations in buildings like non-combustible materials, construction, staircases and lift lobbies, fire escapes and A.C. systems. Special features required for physically handicapped and elderly in building types – Heat and smoke detectors – Fire alarm system, snorkel ladder – Fire lighting pump and water storage – Dry and wet risers – Automatic sprinklers
                                                                        TOTAL : 45
REFERENCES
1.   E.R.Ambrose, “Heat Pumps and Electric Heating”, John and Wiley and Sons, Inc., New    York, 1968.
2.               Handbook for Building Engineers in Metric systems, NBC, New Delhi, 1968.
3.               Philips Lighting in Architectural Design, McGraw-Hill, New York, 1964.
4.               R.G.Hopkinson and J.D.Kay, “The Lighting of buildings”, Faber and Faber, London, 1969.
5.   William H.Severns and Julian R.Fellows, “Air-conditioning and Refrigeration”, John Wiley and Sons, London, 1988.
6.               A.F.C. Sherratt, “Air-conditioning and Energy Conservation”, The Architectural Press, London, 1980.
7.   National Building Code.

CE1405             COMPUTER AIDED DESIGN & DRAFTING LABORATORY         0  0  4  100

OBJECTIVE

At the end of the course the student acquires hands on experience in design and preparation of structural drawings for concrete / steel structures normally encountered in Civil Engineering practice.
1.         Design and drawing of RCC cantilever and counterfort type retaining walls with reinforcement details                                                                                                       
2.         Design of solid slab and RCC Tee beam bridges for IRC loading and reinforcement details
3.         Design of pressed, rectangular and hemispherical bottomed steel tank – Staging – Detailed drawings
4.         Design and drafting of Intz type water tank, Detailing of circular and rectangular water tanks
5.         Design of plate girder bridge – Twin Girder deck type railway bridge – Truss Girder bridges – Detailed Drawings including connections
                                                                                                            TOTAL : 60

TEXT BOOKS

1.   Krishna Raju, “Structural Design & Drawing (Concrete & Steel)”, CBS Publishers
2.   Punmia, B.C., Ashok Kumar Jain, Arun Kumar Jain, “Design of steel structures”, Lakshmi publications Pvt. Ltd.

REFERENCES

1.   Krishnamurthy, D., “Structural Design & Drawing – Vol. II”, CBS Publishers & Distributors,            Delhi
2.   Krishnamurthy, D., “Structural Design & Drawing – Vol. III Steel Structures”, CBS Publishers & Distributors, New Delhi

 

            EXAMINATION DURATION        4 HOURS
                                 LIST OF EQUIPMENTS

  1. 1.  Models of Structures                       -           1 each.
  1. Computers Pentium IV                           -           30 Nos.
  2. Analysis and Design Software  
                  - Minimum 5 user License           -           1 No.
  1. Auto CAD Software                              
- Multi user License                    -           1 No.


CE1406 DESIGN PROJECT                                                                   0  0  4  100
                                                                                               
OBJECTIVE
The objective of this course is to impart and improve the design capability of the student. This course conceives purely a design problem in any one of the disciplines of Civil Engineering; e.g., Design of an RC structure, Design of a waste water treatment plant, Design of a foundation system, Design of traffic intersection etc. The design problem can be allotted to either an individual student or a group of students comprising of not more than four. At the end of the course the group should submit a complete report on the design problem consisting of the data given, the design calculations, specifications if any and complete set of drawings which follow the design.

                                                                                                                       

TOTAL : 60EVALUATION  PROCEDURE
The method of evaluation will be as follows:
1.         Internal Marks                                                                            : 20 marks
(decided by conducting 3 reviews by the guide appointed by the
 Institution)
2.         Evaluation of Project Report                                                      : 30 marks
(Evaluated by the external examiner appointed the University).
Every student belonging to the same group gets the same mark
3.         Viva voce examination                                                               : 50 marks
(evaluated by the internal examiner appointed by the HOD with the
approval of HOI, external examiner appointed by the University and
Guide of the course – with equal Weightage)
   Total              : 100 marks

0 comments:

Post a Comment

 

Anna University Syllabus and Results | Copyright 2009 Tüm Hakları Saklıdır | Blogger Template by GoogleBoy ve anakafa | Sponsored by Noow!